AEG L6FBI824U 사용자 설명서 - 페이지 29

{카테고리_이름} AEG L6FBI824U에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L6FBI824U 32 페이지.

페이지 인쇄

Problem

Too much foam in the

drum during the washing

cycle.

After the washing cycle,

there are some deter-

gent residues in the dis-

penser drawer.

After the check, activate the appliance. The programme continues from the point of

interruption.

If the problem occurs again, contact the Authorised Service Centre.

If the display shows other alarm codes. Deactivate and activate the appliance. If the

problem continues, contact the Authorised Service Centre.

14. CONSUMPTION VALUES

Stated values are obtained in laboratory conditions with relevant stand-

ards. Different causes can change the data: the quantity and type of

laundry and ambient temperature. Water pressure, the supply voltage

and the temperature of inlet water may also affect the washing pro-

gramme duration.

Technical specifications may be changed without prior notice to improve

the quality of product.

During the washing programme, the Prosense technology can vary the

wash duration and the consumption values. For more details see 'The

Prosense load detection' paragraph in 'Daily Use' chapter.

Programmes

Algod. 60°C

Algod. 40°C

Sintéticos 40°C

Delicados 40°C

Lana/Lãs + Seda 30°C

Standard cotton programmes

Possible solution

• Reduce the quantity of detergent.

• Make sure that the flap is in the correct position (UP for

powder detergent - DOWN for liquid detergent).

• Make sure you have used the detergent dispenser accord-

ing the indications given in this user manual.

Load

Energy

(kg)

consump-

tion (kWh)

1,35

0,87

0,60

0,55

1,5

0,45

Water

Approxi-

consump-

mate pro-

tion (litre)

gramme

duration

(minutes)

159

158

103

ENGLISH

Remain-

ing mois-

ture (%)