Fujitsu T4410 - LifeBook Tablet PC 바이오스 매뉴얼 - 페이지 25
{카테고리_이름} Fujitsu T4410 - LifeBook Tablet PC에 대한 바이오스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu T4410 - LifeBook Tablet PC 27 페이지. Lifebook t series
Fujitsu T4410 - LifeBook Tablet PC에 대해서도 마찬가지입니다: 진단 매뉴얼 (10 페이지), 복구 매뉴얼 (8 페이지), 시작하기 (13 페이지), 사용자 설명서 (8 페이지)
페이지 인쇄
Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.
■
Be careful of the operating environment when booting from a CD or you may overwrite files by mistake.
A bootable CD-ROM has either a floppy disk format or a hard drive format. When the CD-ROM is used,
■
drive allocations change automatically without changing the BIOS setup. If a floppy disk format is used,
the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal
hard drive is not present or disabled. The bootable CD-ROM can never use a C: designation if a formatted
internal hard drive is present since the C: designator is always reserved for the hard drive.The boot
sequence ignores the new drive designations, but your application software will use the new designations.
F1
ESC
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Boot priority order:
1: Floppy Disk Drive
2: Drive0:
3: Drive1:
4: CD/DVD Drive
5: NETWORK:
6:
7:
8:
Excluded from boot order:
: USB MEMORY:
: USB HDD:
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot Menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit Menu. If you wish
to move to another menu, use the cursor keys.
Phoenix SecureCore(tm) Setup Utility
Info
System
Advanced
Boot Device Priority
Boot priority order:
1:
Floppy Disk Drive
2:
Drive0 HDD: FUJITSU MHZ2160BH G2
3:
Drive1 HDD: None
4:
CD/DVD Drive
5:
NETWORK: Broadcom LAN
6:
7:
8:
Excluded from boot order:
:
USB MEMORY: None
:
USB HDD: None
Help
Select Item
-/Space
Exit
Select Menu
Enter
Figure 18. Boot Device Priority Submenu
Description
The boot selections determine the order in which the BIOS searches for the operating system during a
startup sequence. To change the order, highlight one source by using the [up] or [down] cursor keys and
then press the [+] or [-] key to change the order number. Tapping [x] removes from the list a device that is
not installed. Tapping [x] on an item in the Excluded list adds the device to the Boot priority list. Be sure to
save your changed order when you exit the BIOS setup utility.
NOTE: Be aware that if you use the CD-ROM drive as the first boot device, certain files may be
overwritten, depending upon your operating environment.
Security
Boot
Exit
Item Specific Help
Keys used to view or
configure devices:
<+>/<Space> or <->
moves the device up or
down.
<x> exclude or include
the device to boot.
Change Values
F9
Setup Defaults
Select
Sub-Menu
F10
Save and Exit
B o o t M e n u
25