Fujitsu UH-X 사용자 설명서 - 페이지 18
{카테고리_이름} Fujitsu UH-X에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu UH-X 19 페이지.
Fujitsu UH-X에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Power on
You can use the Power button to turn on your
notebook. Once you have connected an AC
adapter to the notebook or charged the
battery, you can power on your notebook.
When you turn on your notebook, be
sure you have a power source
connected to it. This means that at
least battery is installed and charged
or that the AC adapter is connected
and has power.
You can press the Power button to turn off the
notebook. After you have finished working on
the notebook, you can either leave it in
Standby (i.e. suspend) mode or turn it off.
Do not carry the notebook around
when it is still powered on. Do not
subject the notebook to shocks and
vibrations. Failure to do so may
damage the notebook.
When you power on your notebook, it will
perform a Power On Self Test (POST) to check
the internal parts and configuration for normal
functionality. If an error is found, your
notebook will emit an audio warning and/or
show an error message.
After satisfactory completion of the Power On
Self Test (POST), your notebook will load your
operating system.
Power off
To power off the notebook, always shut down
the notebook properly using the Windows
shutdown procedure.
Remember to close all files, exit all
applications and shut down the operating
system prior to turning off the power using
the power button. If documents are opened
when the notebook is turned off, data may be
lost and this may result in storage drive
errors.
Remember to use the correct procedure to
shut down the notebook. The proper procedure
is:
Windows 11
1. Click the Windows icon
2. Click the Power and select Shut down
from the list.
17