Fujitsu BS2000 SE Series 운영 매뉴얼 - 페이지 7
{카테고리_이름} Fujitsu BS2000 SE Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu BS2000 SE Series 20 페이지. Server unit x86
Fujitsu BS2000 SE Series에 대해서도 마찬가지입니다: 빠른 매뉴얼 (43 페이지), 매뉴얼 (42 페이지), 운영 매뉴얼 (22 페이지), 운영 매뉴얼 (25 페이지)
페이지 인쇄
2.1 Switching the Server Unit on/off
Information on switching on and starting the SE server and on switching it off and shutting it down is provided in the
"Basic Operating Manual" [ ], section "Switching the server on and off".
Switching the Server Unit on
Before the Server Unit is switched on, the power status indicator lights up green (item 5 in
and SU330 the status indicator (item 1 in
> As administrator, BS2000 administrator or authorized BS2000 operator, switch on the Server Unit using the
SE Manager (menu
Administration" manual [ ].
The On/Off switch / status indicator lights up green (item 4 in
switches on, conducts a system test and starts X2000.
If automatic IPL is configured for BS2000, the BS2000 system (Native or as a VM2000 monitor system) is also
started with the configured settings.
Switching the Server Unit off
Before the Server Unit is switched off, the On/Off switch / status indicator lights up green, and after the Server Unit
has been switched off it no longer lights up resp. on SU320 and SU330 lights up white (item 4 in
1 in
figure 4
).
> As administrator, BS2000 administrator or authorized BS2000 operator, switch off the Server Unit using the
SE Manager (menu
Administration" manual [ ].
When the Server Unit is switched off, the BS2000 system is shut down properly taking into account the remaining
runtime specified.
The power status indicator (item 5 in
connected to the power supply (power cable connected).
This status indicator does not light up in the following situations:
The Server Unit is switched off and not connected to the power source.
The Server Unit is switched on and operating normally.
On SU320 and SU330 the power status indicator is integrated into the On/Off switch / status indicator. The On/Off
switch / status indicator lights up white when the Server Unit is switched off, but connected to the power supply
(power cable connected).
The On/Off switch / status indicator does not light up when the SU320 is switched off and not connected to the
power supply. It lights up green when the Server Unit is switched on and is in normal operation mode.
1
figure 4
) lights up white.
Hardware -> Units Units
,
5
Hardware
->
Units Units
,
5
figure 2
, only on SU310) lights up green when the server is switched off but
tab,
Power on
icon for the Server Unit), see the "Operation and
figure 2
resp. item 1 in
tab,
Power off
icon for the Server Unit), see the "Operation and
figure 2
) resp. on SU320
figure 4
). The Server Unit
figure 2
resp. item
7