Fujitsu BS2000 SE Series 운영 매뉴얼 - 페이지 13

{카테고리_이름} Fujitsu BS2000 SE Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu BS2000 SE Series 25 페이지. Server unit x86
Fujitsu BS2000 SE Series에 대해서도 마찬가지입니다: 빠른 매뉴얼 (43 페이지), 매뉴얼 (42 페이지), 운영 매뉴얼 (22 페이지), 운영 매뉴얼 (20 페이지)

페이지 인쇄
Fujitsu BS2000 SE Series 운영 매뉴얼

2.2.2 Indicators on the operating panel

Indicator
Meaning
ID
ID indicator (blue)
Lights up blue when the Server Unit has been selected by pressing the ID button. To deactivate,
press the button again.
The ID indicator can also be activated via the ServerView Operations Manager and the iRMC web
interface, and its status can be reported to the ServerView Operations Manager and the iRMC.
On SU300 and SU310:
Beside the status indicator there is a separate power status indicator.
Status indicator (green)
Does not light up when the Server Unit is switched off but connected to the power supply (power
cable connected).
Lights up green during power up and when operating normally (S0).
Power status indicator (power cable connected) (green) on the right-hand side of the On/Off
switch
Does not light up in the following cases:
The Server Unit is not connected to the power source.
The Server Unit is switched on and operating normally (S0).
Lights up green when one of the following cases occurs:
The Server Unit is switched off but connected to the power supply (power cable connected).
The Server Unit is switched on but is in the power up delay.
On SU320:
The power status indicator is integrated into the status indicator.
Status indicator (green and white)
Does not light up when the Server Unit is not connected to the power source.
Lights up white
cable connected).
Alternate flashing green and white
delay.
Lights up green when the Server Unit is switched on and operating normally (S0).
i
After the Server Unit has been connected to the power source, it takes approximately 60
seconds until the Server Unit has entered standby mode.
when the Server Unit is switched off but connected to the power supply (power
when the Server Unit is switched on but is in the power up
13