Brother DCP120C - Flatbed Multifunction Photo Capture Center 빠른 설정 매뉴얼 - 페이지 17
{카테고리_이름} Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP120C - Flatbed Multifunction Photo Capture Center 24 페이지. Quick setup guide - french
Brother DCP120C - Flatbed Multifunction Photo Capture Center에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (33 페이지), 부품 참조 목록 (30 페이지), 빠른 설정 매뉴얼 (33 페이지), (프랑스어) 빠른 설치 가이드 (24 페이지)
페이지 인쇄
Installing the Driver & Software
For USB Interface Users
®
For Mac OS
X 10.2.4 or greater
Important
Make sure that you have finished the
instructions from Step 1 Setting Up the
Machine on page 4-9.
Note
®
For Mac OS
X 10.2.0 to 10.2.3 users, upgrade to
®
Mac OS
X 10.2.4 or greater. (For the latest
information for Mac OS
http://solutions.brother.com)
1
Unplug the machine from the AC outlet and
from your computer, if you already connected
an interface cable.
2
Turn on your Macintosh
3
Put the supplied CD-ROM into your CD-ROM
drive.
4
Double-click the Start Here OSX icon to install
the drivers and MFL-Pro Suite. If the language
screen appears, choose your language.
®
X, visit
®
.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and restart
®
your Macintosh
.
7
Open the scanner cover to its open position.
8
After the DeviceSelector window appears
connect the USB interface cable to your
Macintosh and then to the machine.
The DeviceSelector window will not appear if
you have connected a USB interface cable to
the machine before restarting your Macintosh
or if you are overwriting a previously installed
version of the Brother Software. If you
encounter this problem continue with the
installation but skip step 13. After the software
installation is completed you should select your
Brother machine from the Model pull-down list
in the main screen of ControlCenter2. For
details, See the Software User's Guide on the
CD-ROM.
®
Macintosh
®
15