Fujitsu BS2000 SE500 매뉴얼 - 페이지 14
{카테고리_이름} Fujitsu BS2000 SE500에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu BS2000 SE500 42 페이지. Server unit x86
Fujitsu BS2000 SE500에 대해서도 마찬가지입니다: 운영 매뉴얼 (22 페이지)
페이지 인쇄
Powering on further units
The powered-off Server Unit is powered on. As soon as the Power status for the Server Unit
is On and the monitor or Native BS2000 system have reached the status INIT_ONLY, you
can boot the BS2000.
i
Powering on additional Units (redundant MU, HNC)
For BS2000 operation on an SU /390m the following units should also be powered on:
In the case of MU redundancy the second MU should also be powered on. Only in this
●
way will it remain possible to continue operating the SVP of the SU /390 if the first MU
crashes. The SE Manager on the second MU will also remain available.
To enable the BS2000 systems to communicate over the IP network and ensure access
●
to Net-Storage is possible, the HNC must be powered on. Redundant existing HNCs
should also be powered on.
14
After a Server Unit has been powered on, depending on the operating mode set,
the Native BS2000 system or the VMs are started up if an automatic startup (auto
IPL) has been configured for this purpose.
Powering on, starting up BS2000, powering off
U41857-J-Z125-2-76