Fujitsu BS2000 SE710 운영 매뉴얼 - 페이지 18

{카테고리_이름} Fujitsu BS2000 SE710에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu BS2000 SE710 22 페이지. Server unit x86

페이지 인쇄
Fujitsu BS2000 SE710 운영 매뉴얼
3
ID indicator (blue)
Lights up blue when the MU has been selected by pressing the ID button. Press the button again to
deactivate it.
The ID indicator can also be activated via the ServerView Operations Manager and the iRMC web
interface, and the status can be reported to the ServerView Operations Manager and the iRMC.
4
ID button
LAN ports
Figure 8: LAN indicators
No.
Meaning
1
LAN link/transfer
(System LAN port
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
Flashes green when a LAN transfer is in progress.
2
LAN speed
(System LAN port
Lights up green for a LAN transfer rate of 10 Gbps.
Lights up yellow for a LAN transfer rate of 1 Gbps.
Does not light up for a LAN transfer rate of 100 Mbps.
The MAC addresses entered on the green ID card refer to LAN #1 (SYS1) and #2 (SYS2).
The MAC addresses of LAN ports #3 (not used) and #4 (not used) are then the next two MAC addresses in
ascending order. The green ID card is located on the front of the Server Unit, see item 1 in
SYS1
or
SYS2
)
SYS1
or
SYS2
)
figure 1/2
.
18