Fujitsu FUTRO A300 운영 매뉴얼 - 페이지 17

{카테고리_이름} Fujitsu FUTRO A300에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FUTRO A300 29 페이지. Futro a300

Connecting external devices

Read the documentation on the external device before connecting it.

With the exception of USB devices, always remove all power plugs

before connecting external devices!

Do not connect or disconnect cables during a thunderstorm.

Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.

Connect and disconnect the cables in the order described below.

► Turn off all power and equipment switches.

Cord

Cable,

► Remove all power plugs from the grounded mains outlets.

► Connect all the cables to the device and the external devices. Please make sure that you

always observe the safety notes provided in

► Plug all data communication cables into the appropriate sockets.

► Plug all power cables into the grounded mains outlets.

USB devices are hot-pluggable. This means you can connect and disconnect

USB cables while your device is switched on.

Additional information can be found in

ports", Page 15

► Switch off all affected devices.

Cable,

► Remove all power plugs from the grounded mains outlets.

► Unplug all data communication cables from the appropriate sockets.

► Disconnect all of the cables from the device and from the external devices.

Fujitsu Technology Solutions

and in the documentation for the USB devices.

"Important notes", Page

"Connecting external devices to the USB

Getting started