Fujitsu FUTRO S9010 운영 매뉴얼 - 페이지 23

{카테고리_이름} Fujitsu FUTRO S9010에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FUTRO S9010 36 페이지.

페이지 인쇄

Connecting external devices

Read the documentation on the external device before connecting it.

With the exception of USB devices, always remove all power plugs

before connecting external devices!

Do not connect or disconnect cables during a thunderstorm.

Always hold the plug of a cable when removing it. Never unplug a

cable by pulling the cable itself.

To ensure that your device works properly, use only the connection cable

supplied or use a high-quality connection cable.

Ports on the device

Externaldevices

Ports

Device

The ports are located on the front and rear side of the device. The ports available on

your device depend on the conﬁguration level you have selected. The standard ports are

marked with the symbols shown below (or similar). Detailed information on the location

of the ports is provided in the manual for the mainboard.

Headphone port, black (front

of device)

Headphones

Audio output (Line Out), light

green

Lineout

Audiooutput

Serial port, turquoise

Serialport

USB 2.0 - Universal Serial

Bus, type-A, black

DisplayPort

PS/2 keyboard port, purple

Keyboardport

Some of the connected devices require special software (e.g. drivers) (refer to the

documentation for the connected device and operating system).

Fujitsu

Microphone port, black (front of device)

Microphoneport

Audio input (Line In), light blue

Linein

Audioinput

RJ45-LAN port

LANport

USB 3.1 Gen1 - Universal Serial Bus,

type-A: blue, type-C: black

UniversalSerialBus

PS/2 mouse port, green

PS/2mouseport

Mouseport

Getting started