Fujitsu PRIMEPOWER 2500 하드웨어 플랫폼 매뉴얼 - 페이지 19

{카테고리_이름} Fujitsu PRIMEPOWER 2500에 대한 하드웨어 플랫폼 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMEPOWER 2500 50 페이지. Enterprise servers
Fujitsu PRIMEPOWER 2500에 대해서도 마찬가지입니다: 매뉴얼 (21 페이지)

페이지 인쇄

Chapter 3 Backup and Restore of System Disk

(PRIMEPOWER800/900/1000/1500/2000/2

500)

This chapter explains the procedures to backup/restore the disk (hereafter called, the system disk) containing

the Solaris OS software.

3.1

Types of Backup Procedures

Backup of the system disk requires that the disk and slices being backed up not be in use. The system disk

contains file systems (such as the root (/) file system) that cannot be dismounted. In backing up the system

disk, the special procedures are required.

The following are some of the typical ways to back up a Solaris OS system disk. Understanding them will

help you choose the appropriate method to back up your system disk properly.

For detailed information about the backup procedures mentioned in b. and d., see " System Console

Software User's Guide."

To back up a file system unit, use the ufsdump(1M) command after booting in single-user mode.

If you are restoring, use the ufsrestore(1M) command after booting from the Solaris OS CD/DVD to

restore the file system unit.

To back up a file system unit, use the ufsdump(1M) command after booting from the Solaris OS

CD/DVD.

If you are restoring, use the ufsrestore(1M) command after booting from the Solaris OS CD/DVD to

restore the file system unit.

To back up a slice unit, use the dd(1M) command after booting from the Solaris OS CD/DVD.

If you are restoring, use the dd(1M) command after booting from the Solaris OS CD/DVD to

The file system that will be backed up is only the ufs file system.

Disk partition information such as the size of each file system will not be backed up. You must

record the information separately.

The ufsdump(1M) command backs up the file system divided into the file unit, so it is possible

to restore to a disk having a different file system size. If a limited amount of space has been used

in the file system, this may back up into a space smaller than the size of the file system itself.

When backing up using the ufsdump(1M) command, it is possible to restore only the file that

you select.

The file system that will be backed up is only the ufs file system.

Disk partition information such as the size of each file system will not be backed up. You must

record the information separately.

The ufsdump(1M) command backs up the file system divided into the file unit, so it is possible

to restore to a disk having a different file system size. If limited amount of space has been used

in the file system, this may back up into a space smaller than the size of the file system. In the

backup using the ufsdump(1M) command, it is possible to restore only the file that you select.