Fujitsu PRIMERGY 10/40GbE 사용자 설명서 - 페이지 3
{카테고리_이름} Fujitsu PRIMERGY 10/40GbE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY 10/40GbE 23 페이지. Connection blade 18/8+2
페이지 인쇄1 Product Overview
The PRIMERGY 10/40GbE Connection Blade 18/8+2 is an integrated 10/40Gbit Ethernet switch for
PRIMERGY BX900/BX400 Blade Server System.
This product has the 3 types of mode. The "Switch mode" provides normal Ethernet switching function. "IBP
(Intelligent Blade Panel) mode" provides the easy configuration for Blade server system and EHM (End
Host Mode) provides loop guard at uplink port by prohibiting the forwarding between uplinks.
The PRIMERGY 10/40GbE Connection Blade 18/8+2 provides the following hardware configuration.
- 18 internal 10GBASE-KR ports connected to servers through chassis backplane (18 downlink ports)
- 8 external Small Form-Factor Pluggable Plus (SFP+) based ports (8 uplink ports)
- 2 external Quad Small Form-Factor Pluggable Plus (QSFP+) based ports (2 uplink ports)
- 1 internal console port connected to management blades through chassis backplane
- 1 10/100BASE-T port connected to management blades through chassis backplane
1.1 Description of Hardware
This section shows front panel description and overview of the hardware specifications.
1.1.1
Front Panel Description
Figure 2 shows 8 SFP+ based ports, 2 QSFP+ based ports, LED and in the Front Panel.
E
F
G
Figure 3 PRIMERGY 10/40GbE Connection Blade 18/8+2 Front Panel
Table 1 PRIMERGY 10/40GbE Connection Blade 18/8+2 Front Panel Items
Figure 1. PRIMERGY 10/40GbE Connection Blade 18/8+2
C
A
Front Panel Items
SFP+ Based Ports
A
SFP+ Based Ports
B
QSFP+ Based Ports
C
SFP+ Port LED
D
QSFP+ Port LED
E
ID LED
F
ISL LED
G
Status LED
PRIMERGY 10/40GbE Connection Blade 18/8+2 User Guide
Page 3 / 23
D
B