Fujitsu PRIMERGY B900 참조 매뉴얼 - 페이지 32
{카테고리_이름} Fujitsu PRIMERGY B900에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY B900 36 페이지. Blade server systems, contents of the mmb s1 help system
Settings
AuDi-MIP iRMC Configuration
o
The input fields of this section are available only if "Detailed" was
selected above.
AuDi-MIP Connection Blade Management Controller Configuration
o
The input fields of this section are available only if "Detailed" was
selected above.
Domain Name Server
o
Apply: Click the "Apply" button to activate the settings.
o
After pressing the "Apply" button a confirmation page is displayed
listing the detailed effects for the management IP settings. Important:
DHCP is set for the management controller's IP settings of all included
blades and IP settings made in the AuDi-MIP "Advanced" page will be
replaced.
Advanced
This page allows to assign the IP addresses individually for each device (18 iRMC
addresses for server blades, 8 addresses for connection blades and one for the master
MMB).
Advanced configuration
•
Enable AuDi-MIP: Enables/disables the automatic distribution of
o
management IP addresses.
iRMC: Select the server blades in the given configuration and enter IP
o
addresses to be used.
Connection Blade Management Controllers: Select the connection blades
o
in the given configuration and enter IP addresses to be used.
Management Blade: Select the master management blade and enter the
o
IP address to be used.
Refresh: This button shows the currently active management IP
o
addresses in the system unit.
Default: The button automatically enters the default management IP
o
addresses in all entry fields.
Apply: Click the "Apply" button to activate the settings.
o
After pressing the "Apply" button a confirmation page is displayed
listing the detailled effects for the management IP settings. Important:
DHCP is set for the management controller's IP settings of all included
32
Subnet Mask: Enter the subnet mask.
Gateway: Enter the gateway address.
IP Address Range: Enter the first address and the last address of
the address range.
Include Management Blade: Includes/excludes the MMB
address.
IP Address Range: Enter the first address and the last address of
the address range.
Include Management Blade: Includes/excludes the MMB
address.
DNS Domain: Enter the name or ID of the DNS domain.
DNS Server 1 / 2: Enter the IP addresses of the DNS servers.