Fujitsu PRIMERGY BX900 빠른 시작 매뉴얼 - 페이지 20

{카테고리_이름} Fujitsu PRIMERGY BX900에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY BX900 22 페이지. Blade server systems, fibre channel connection blade

페이지 인쇄

Enabling Access Gateway mode using the CLI

Complete the following steps to enable Access Gateway mode using the CLI.

1. Log in using the default administrative account.

Password: password

2. Enter the switchDisable command to disable Embedded Switch Module.

3. Enter the configUpload command to save the current configuration on the Embedded Switch Module.

This command is optional and is only required if you are converting an existing Embedded Switch Module to

Access Gateway mode.

4. Enter the following command to enable Access Gateway mode:

ag ––modeEnable

The Embedded Switch Module automatically reboots and comes back online in Access Gateway mode using a

factory default F_Port to N_Port mapping. You can enter the

ag ––modeShow command to ensure that the module is in Access Gateway mode. See the Access Gateway

Administrator's Guide for more detailed configuration information.

You can also enter the ag ––mapshow command to display the F_Port to N_Port mapping. Enter ag ––help

command to display a list of all Access Gateway actions.

Changing from Access Gateway mode to Fabric Switch mode

If your Embedded Switch Module is currently configured in Access Gateway mode, you can enable the module for

Fabric OS Native mode by disabling Access Gateway mode. When you do this, the module automatically reboots in

Fabric OS Native mode; however, the switch will be segmented so as not to effect the external Fabric. For

instructions on how to join this module to the Fabric, refer to the Access Gateway Administrator's Guide.

Determine if the Embedded Switch Module is running in Access Gateway mode by entering the switchShow CLI

command to display the current switch configuration. If running in Fabric OS Native mode, the switchMode

parameter displays Access Gateway Mode.

For complete instructions on disabling Access Gateway mode using the CLI and joining the switch to the fabric, refer

to the "Disabling Access Gateway Mode" section in the Access Gateway Administrator's Guide.

Brocade 5450 Embedded Switch Module QuickStart Guide

Publication Number: 53-1001265-02

19 of 20