Fujitsu PRIMERGY BX900 빠른 시작 매뉴얼 - 페이지 9
{카테고리_이름} Fujitsu PRIMERGY BX900에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY BX900 22 페이지. Blade server systems, fibre channel connection blade
페이지 인쇄c.
From the Hyperterminal window, select an available COM port from the Connect using list and click OK.
The Port Settings dialog box displays.
FIGURE 3
COM Properties dialog box
d. From the COM Properties window, select the following configuration values and click OK.
•
Bits per second: 115200
•
Databits: 8
•
Parity: None
•
Stop bits: 1
•
Flow Control: None
The Hyperterminal is connected and ready to accept text.
FIGURE 4
Hyperterminal
e. Use the MMB default username and password. The default is admin for the username and admin for the
password.
NOTE
The Embedded Switch Module comes direct from the factory with an additional startup process to set the
initial password. If you want to bypass setting the initial password, use Control-C to exit or press Enter to
proceed. The password will not be changed. You will be prompted again at the next login until the password
is changed.
8 of 20
Brocade 5450 Embedded Switch Module QuickStart Guide
Publication Number: 53-1001265-02