Fujitsu PRIMERGY BX920 S1 옵션 매뉴얼 - 페이지 22
{카테고리_이름} Fujitsu PRIMERGY BX920 S1에 대한 옵션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY BX920 S1 32 페이지.
페이지 인쇄
Installing a second processor
Installing the heat sink
Ê Carefully remove the heat sink from the packaging. Take care
not to touch the thermal paste on the underside of the heat sink.
Figure 9: Securing the heat sink for CPU 2
Ê Carefully place the heat sink on the CPU.
Ê Fasten the heat sink in place by tightening the four pre-mounted screws (see
circles) in a crossover pattern.
V
CAUTION!
Never install a processor without a heat sink as otherwise the
processor may overheat, causing the possible failure of the processor
and system board.
Ê Close the server blade, re-insert it in the system unit and switch it on as
described in
chapter "Completion" on page 29
22
Options Guide
Processors
and following.
BX920 S1