Fujitsu PRIMERGY DX920 S3 사용 설명서 - 페이지 7
{카테고리_이름} Fujitsu PRIMERGY DX920 S3에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY DX920 S3 14 페이지.
페이지 인쇄F1
XIII
RAID Functionality on Server Blade
Section
The Dual Server Blade supports different RAID soltutions for internal HDD's
1. PCH based RAID
2. PCH based RAID with SAS upgrade
3. SAS RAID HDD Module with LSI HW RAID w/o cache
4. SAS RAID HDD Module with LSI HW RAID w/ 512 MB Cache and optional FBU
Also the SAS BP has to be changed. It is included in the RAID Mezz HDD Connection Kit.
Configuration Hint - Second CPU needed for SAS RAID Modules or SX910/940/960
The SAS RAID Modules are only supported if second CPU is installed
The connection to the SX910/SX940/SX960 is only supported if second CPU is installed
S26361-F3674-E1
Onboard Controller SAS upgrade
LSI
Patsburg B
RAID 0, 1 & 10
no controller cache
SAS 3Gb/sec
4 internal ports
PCIe x4
no PCI slot required
max. 1x per Server Blade
S26361-F4531-E513
PY SAS RAID HDD Module
w/ 512 MB Cache
MegaRAID
RAID level 0/1/1E/10/5/50/6/60
SAS 6Gb/sec
pluggable on the main board
PCIe Gen3 interface
4x SAS links to midplane
2x SAS links to internal HDD's
max. 1x per Server Blade
1 x
S26361-F4531-E10
RAID FBU Upgrade
Flash Backup Unit
max. 1x per Server Blade
S26361-F4531-E50
RAID HDD Module Connection Kit
2x SAS HDD BP
max. 1x per Server Blade
G
This upgrade is required to
add SAS support to the PCH controller
S26361-F4531-E300
PY SAS RAID HDD Module
w/o Cache
MegaRAID (iMR)
RAID level 0/1/10
SAS 6Gb/sec
pluggable on the main board
PCIe Gen3 interface
4x SAS links to midplane
2x SAS links to internal HDD's
max. 1x per Server Blade
The SAS Expander Mezz Card
must be used in order
to establish the connection
to the SAS CB with the
PY SAS RAID HDD Module
S26361-F4531-E513 or
PY SAS RAID HDD Module w/o cache
S26361-F4531-E300
Fujitsu PRIMERGY Server
System configurator and order-information guide
PRIMERGY BX920 S3
Status: 2013-12-30
7 of 14