Fujitsu Primergy RX100 S4 서비스 보충 설명서 - 페이지 21

{카테고리_이름} Fujitsu Primergy RX100 S4에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Primergy RX100 S4 43 페이지.
Fujitsu Primergy RX100 S4에 대해서도 마찬가지입니다: 수동 시작 (8 페이지)

페이지 인쇄

Replacement routines

4.4

Replacing the system fans

CAUTION!

The system fans are non-redundant, you have to replace the defective

system fan immediately.

Ê Open the server as described in the

Figure 5: Removing the system fan

Ê Remove the system fan cable of the defective system fan from the corre-

sponding connector on the system board (see the cabling plans in the

Options Guide).

Ê Take the system fan cable out of the cable clamps.

Ê Remove the system fan by pulling upward.

Ê Insert the new system fan. Make sure that the green point goes in direction

of the CPU and that the cable has been routed in the right way.

Ê Route the system fan cable using the cable clamps.

Ê Plug the system fan cable of the new system fan on the corresponding

connector on the system board.

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

RX100 S4

section "Preparation" on page

Service Supplement

Replacing the system fans

17.