Fujitsu PRIMERGY RX300 S8 사용 설명서 - 페이지 8

{카테고리_이름} Fujitsu PRIMERGY RX300 S8에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY RX300 S8 31 페이지. System configurator and order information guide
Fujitsu PRIMERGY RX300 S8에 대해서도 마찬가지입니다: 데이터시트 (12 페이지)

페이지 인쇄

Section

There are 2 processor sockets available.

The first socket must always be equipped with the first CPU which can be selected via configurator

It is also possible to upgrade a dual-processor system later on with a second CPU

Both PCIe-3 x16 slots are connected to CPU 2 and are useable with configured 2nd CPU only!

Two processors with different clock frequencies are not possible

A multi-processor operating system is required for a dual-processor system.

Max. two CPU`s can be selected per basic unit

One of following CPU´s has to be selected as first CPU

for an orderable basic unit

Optional second CPU has to be the same type like the first CPU

Basic 4C CPU's

- 1x 64-bit Intel Xeon (10MB Smart Cache)

1333 MHz DDR3 Bus; 6,40 GT/s QPI Bus and passive heat sink

occupies socket for one CPU

Xeon E5-2603v2 4C/4T 1.80GHz 10MB 6.40GT/s 1333MHz 80W

Xeon E5-2609v2 4C/4T 2.50GHz 10MB 6.40GT/s 1333MHz 80W

Standard Turbo 6C/8C CPU's

- 1x 64-bit Intel Xeon (15/20MB Smart Cache); Hyper-Threading (HT);

1600 MHz DDR3 Bus; 7,20 GT/s QPI Bus and passive heat sink

occupies socket for one CPU

Xeon E5-2620v2 6C/12T 2.10GHz 15MB 7.20GT/s 1600MHz 80W

Xeon E5-2630v2 6C/12T 2.60GHz 15MB 7.20GT/s 1600MHz 80W

Xeon E5-2640v2 8C/16T 2.00GHz 20MB 7.20GT/s 1600MHz 95W

Advanced Turbo+ 8C/10C CPU`s

- 1x 64-bit Intel Xeon (20/25MB Smart Cache); Hyper-Threading (HT);

1866 MHz DDR3 Bus; 8,00 GT/s QPI Bus and passive heat sink

occupies socket for one CPU

Xeon E5-2650v2 8C/16T 2.60GHz 20MB 8.00GT/s 1866MHz 95W

Xeon E5-2660v2 10C/20T 2.20GHz 25MB 8.00GT/s 1866MHz 95W

Xeon E5-2670v2 10C/20T 2.50GHz 25MB 8.00GT/s 1866MHz 115W

Xeon E5-2680v2 10C/20T 2.80GHz 25MB 8.00GT/s 1866MHz 115W

Xeon E5-2690v2 10C/20T 3.00GHz 25MB 8.00GT/s 1866MHz 130W

Segment Optimized CPU`s

- 1x 64-bit Intel Xeon (15/25/30MB Smart Cache); Hyper-Threading (HT);

1866 MHz DDR3 Bus; 8,00 GT/s QPI Bus and passive heat sink

occupies socket for one CPU

Xeon E5-2637v2 4C/8T 3.50GHz 15MB 8.00GT/s 1866MHz 130W

Xeon E5-2643v2 6C/12T 3.50GHz 25MB 8.00GT/s 1866MHz 130W

Xeon E5-2667v2 8C/16T 3.30GHz 25MB 8.00GT/s 1866MHz 130W

Xeon E5-2695v2 12C/24T 2.40GHz 30MB 8.00GT/s 1866MHz 115W

Xeon E5-2697v2 12C/24T 2.70GHz 30MB 8.00GT/s 1866MHz 130W

Low Power 6C/10C CPU's

- 1x 64-bit Intel Xeon (15/25MB Smart Cache); Hyper-Threading (HT);

1600 MHz DDR3 Bus; 7,20/8,00 GT/s QPI Bus and passive heat sink

occupies socket for one CPU

Xeon E5-2630Lv2 6C/12T 2.40GHz 15MB 7.20GT/s 1600MHz 60W

Xeon E5-2650Lv2 10C/20T 1.70GHz 25MB 8.00GT/s 1600MHz 70W

Processor

Fujitsu PRIMERGY Server

System configurator and order-information guide

PRIMERGY RX300 S8

Max. DDR3 Bus Speed depends on:

- max. DDR3 Bus Speed from the CPU and

- max. DDR3 Memory Speed and

- max. memory modules on one memory channel

S26361-F3788-E180

For CPUs which do not offer 1866 MHz support,

S26361-F3788-E250

(Basic, Standard & Low Power class),

System Architect will not offer memory modules

supporting this frequency.

S26361-F3789-E210

S26361-F3789-E260

S26361-F3789-E200

S26361-F3790-E260

S26361-F3790-E220

S26361-F3790-E250

S26361-F3790-E280

S26361-F3790-E300

S26361-F3791-E350

S26361-F3791-E330

S26361-F3791-E300

S26361-F3791-E240

S26361-F3791-E270

S26361-F3792-E240

S26361-F3792-E170

Status 2017-02-28

8 of 31