Fujitsu PRIMERGY RX600 S3 수동 시작 - 페이지 6

{카테고리_이름} Fujitsu PRIMERGY RX600 S3에 대한 수동 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY RX600 S3 8 페이지. Sas model

Hints for error handling

In preparation for a failure, set the following:

"Chapter 5 Operations after OS Installation"

- Set to collect memory dump

If the memory dump is set, debugging information is automatically saved when the STOP error (blue screen) or hang-up occurs

in the system.

This helps to analyze the cause of error occurrence.

- Create a system restoration disk

When the system file or system environments are damaged, the system can be reconstructed with the content saved in the sys-

tem restoration disk.

- Store system settings

Store the BIOS setting information. By storing the BIOS setting information, the original information can be recovered with the

stored information in case that the setting information is lost. The stored information is used for the system maintenance.

When the settings are completed, make sure to check notes before operation.

"5.5 Notes Before Operating the Server"

For details about maintenance after operations have started, refer to "User's Guide Chapter 9 Operating and

Maintenance".

Support and Service

l PRIMERGY information

The latest PRIMERGY, driver, and software information is available at the address below.

http://primergy.fujitsu.com

l Before requesting repairs

If an error occurs in this server, refer to "User's Guide 9.2 Troubleshooting".

If problems can still not be solved, contact an office listed in the "Contact Information".

When contacting the office listed in the "Contact Information", inform them of the product ID and manufactures number that

are detailed on labels on the right side of the server front. Also, inform them of "SAS model" that is detailed on a label on the

left side of the server front.

��

Also read the points to note about requesting repairs beforehand in "User's Guide 9.8.2 Contacting Maintenance Support".

Print the "Configuration Sheets"- "Accident sheet" that is available from Fujitsu PRIMERGY website (http://

primergy.fujitsu.com) and enter the confirmed information. Be careful not to lose this sheet, as you must provide this infor-

mation when you contact an office listed in the "Contact Information".

Send this sheet and the stored BIOS setting information to your maintenance engineer.

Recycle

When disposing of this server, contact an office listed in the "Contact Information".

This server must be disposed of as industrial waste.

��