Fujitsu PRIMERGY SX940 매뉴얼 - 페이지 33
{카테고리_이름} Fujitsu PRIMERGY SX940에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY SX940 44 페이지.
페이지 인쇄Different configurations
Cabling of controller #2
Ê Plug the controller into the contact strip of the main board #2 and fix it with
a screw (as mounting controller #1).
Ê Plug the connector HOST of the upper SAS cable into the SAS connector
MLC1 (4) on the controller #2.
Ê Plug the connector P1 of the upper SAS cable into the connector on the HDD
diskbay 0/1 (5).
Ê Plug onto the connector P2 of the upper SAS cable a protective cap and lay
the cable end at suitable location.
3
2
2
1
Figure 19: Position of the jumper: Four HDDs using two LSI 1064 controllers
I
Make sure that the jumpers on both HDD diskbays are in position 1-2
(blue circles).
SX940
Review
LSI 1078 controllers
33