Fujitsu PRIMERGY TX150 S4 정보 매뉴얼 - 페이지 11
{카테고리_이름} Fujitsu PRIMERGY TX150 S4에 대한 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY TX150 S4 18 페이지. System configurator and order-information guide
E
S26361-F2814-E6
68-Pin Kit for accessible drives
Cable with Terminator
To connect acc. drives to
separate SCSI controller
max. 1x per system
VI
Section
S26361-F3121-E173
Hard disk 73GB in 1" carrier
10000rpm,<5,5ms, 8MB Cache
Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins)
hot plug/hot replace tray
occupies 1" bay
SCSI/RAID controller necessary
4x
max. 4x per system
F
Hard Disk Drives
S26361-F3121-E114
Hard disk 146GB in 1" carrier
10000rpm,<5,5ms, 8MB Cache
Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins)
hot plug/hot replace tray
occupies 1" bay
SCSI/RAID controller necessary
max. 4x per system
S26361-F3121-E573
Hard disk 73GB in 1" carrier
15.000rpm,<4ms, 8MB Cache
Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins)
hot plug/hot replace tray
occupies 1" bay
SCSI/ RAID controller necessary
max. 4x per system
Fujitsu Siemens Computers
Enterprise Products - PRIMERGY Server
System configurator and order-information guide
PRIMERGY TX150 S4
Backup drive and hard disk should run on separate channels
If internal HDD's are connected at the RAID controller
(not IME/ZCR), then for internal accessible drives
the cable S26361-F2814-E6 must be ordered additionally!
S26361-F3121-E130
Hard disk 300GB in 1" carrier
10000rpm,<5,5ms, 8MB Cache
Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins)
hot plug/hot replace tray
occupies 1" bay
SCSI/RAID controller necessary
max. 4x per system
S26361-F3121-E514
Hard disk 146GB in 1" carrier
15.000rpm,<4ms, 8MB Cache
Ultra 320 SCSI (320MB/s)
Interface: Wide SCA (80-pins)
hot plug/hot replace tray
occupies 1" bay
SCSI/ RAID controller necessary
max. 4x per system
Status 25.11.2005
11 of 18