Fujitsu PRIMERGY TX150 S6 서비스 보충 설명서 - 페이지 34

{카테고리_이름} Fujitsu PRIMERGY TX150 S6에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY TX150 S6 45 페이지.
Fujitsu PRIMERGY TX150 S6에 대해서도 마찬가지입니다: 사용 시 참고 사항 (8 페이지)

페이지 인쇄

Replacing the processor

Figure 18: Mounting the heat sink

Ê Tighten the four screws crosswise. Follow the following steps:

1. Turn screw no.1 two/three turns, then will be no tension on the processor

when tightening the next screws.

2. Tighten screws no. 2, 3 and 4 in this order.

3. Tighten screw no.1 finally.

Tighten all screws as far as they will go with a torque of 0.6 NM.

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

After replacing the processor, it is recommended to update the BIOS to

ensure proper operation (BIOS flash diskette, for a description see the

BIOS Manual).

Service Supplement

Replacement routines

TX150 S6