Fujitsu SPARC Enterprise M3000 제품 노트 - 페이지 15
{카테고리_이름} Fujitsu SPARC Enterprise M3000에 대한 제품 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SPARC Enterprise M3000 38 페이지.
Fujitsu SPARC Enterprise M3000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (8 페이지), 안전 및 규정 준수 매뉴얼 (34 페이지), 제품 노트 (42 페이지)
페이지 인쇄
Notes on LDAP/SSL
If the specified timeout is too brief for the configuration, the login process or
retrieval of user privilege settings could fail. In such case, specify larger value for the
timeout and try again.
Notes on Power Consumption Monitoring
Function and Airflow Indicator
The amount of power consumption and exhaust air might not be indicated
■
correctly in the MIB information, in the showenvironment power and the
showenvironment air command output, and on the XSCF Web in the
following cases; and you should wait for one minute and check the value again.
During the server powering on or powering off, or for a while after the power-
■
on or power-off complete
During the active replacement of power supply unit, or for a while after the
■
active replacement complete
The figures on the power consumption monitoring function and airflow indicator
■
respectively represent the dissipation power and volume of air exhausted from
the server. The figures of peripheral devices are not included.
Notes on NTP Server
We recommend the domain to use the XSCF Unit as NTP server. In this case, pay
■
attention to the following points:
XSCF must be connected to an external NTP server
■
When you connect one or more NTP servers in addition to XSCF, connect the
■
same NTP server as XSCF is using
For details on NTP server, contact a service engineer. For details on NTP settings,
refer to the SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers XSCF
User's Guide.
Notes on the NTP Server Referring to the Local Clock
When the NTP server which XSCF refers to is referring to the server's own system
time (local clock), and when the address of "127.127.1.0" is set to that local clock,
time synchronization in XSCF might fail.
General Information About XCP 1091
7