Fujitsu SPARC Enterprise M3000 제품 노트 - 페이지 30

{카테고리_이름} Fujitsu SPARC Enterprise M3000에 대한 제품 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SPARC Enterprise M3000 38 페이지.
Fujitsu SPARC Enterprise M3000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (8 페이지), 안전 및 규정 준수 매뉴얼 (34 페이지), 제품 노트 (42 페이지)

Fujitsu SPARC Enterprise M3000 제품 노트
Solaris OS Issues and Workarounds for All Supported Releases (Continued)
TABLE 7
CR ID
Description
6537511
Bluetooth partner is hung during security tests
execution.
6660168
If a ubc.piowbeue-cpu error occurs on a
domain, the Solaris Fault Management
cpumem-diagnosis module might fail, causing
an interruption in FMA service.
If this happens, you will see the following
output in the console log:
SUNW-MSG-ID: FMD-8000-2K, TYPE:
Defect, VER: 1, SEVERITY: Minor
EVENT-TIME: Fri Apr 4 21:41:57 PDT
2008
PLATFORM: SUNW,SPARC-Enterprise,
CSN: 2020642002, HOSTNAME:
<hostname>
SOURCE: fmd-self-diagnosis, REV:
1.0
EVENT-ID: 6b2e15d7-aa65-6bcc-bcb1-
cb03a7dd77e3
DESC: A Solaris Fault Manager
component has experienced an error
that required the module to be
disabled. Refer to
http://sun.com/msg/FMD-8000-2K for
more information.
AUTO-RESPONSE: The module has been
disabled. Events destined for the
module will be saved for manual
diagnosis.
IMPACT: Automated diagnosis and
response for subsequent events
associated with this module will
not occur.
REC-ACTION: Use fmdump -v -u
<EVENT-ID> to locate the module.
Use fmadm reset <module> to reset
the module.
6668237
After DIMMs are replaced the corresponding
DIMM faults are not cleared on the domain.
22
SPARC Enterprise M3000 Server Product Notes for XCP Version 1091 • April 2010
Workaround
Restart application server.
If FMA service fails, issue the following
command on the domain to recover:
# svcadm clear fmd
Then restart cpumem-diagnosis:
# fmadm restart cpumem-diagnosis
Use the following commands:
# fmadm repair fmri|uuid
# fmadm rotate