Brother MFC 3240C - Color Inkjet - All-in-One 빠른 설정 매뉴얼 - 페이지 11
{카테고리_이름} Brother MFC 3240C - Color Inkjet - All-in-One에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC 3240C - Color Inkjet - All-in-One 26 페이지. Brother mfc-3240c: quick setup
Brother MFC 3240C - Color Inkjet - All-in-One에 대해서도 마찬가지입니다: 부품 참조 목록 (28 페이지), 빠른 설정 매뉴얼 (40 페이지), 빠른 설정 매뉴얼 (37 페이지)
페이지 인쇄
Print Quality Check
6
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
Press Start
2
Make sure the paper is loaded in the paper
tray.
Press Colour Start.
The machine starts printing the PRINT
QUALITY CHECK SHEET (only during
initial ink cartridge installation).
3
Check the quality of the four colour blocks
formed by the short lines printed on the
sheet.
(BLACK/ CYAN/ YELLOW/ MAGENTA)
Print Quality Check
1. Check the quality of the four-color blocks formed by the short lines.
2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.
Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process
and follow the prompts on the LCD.
Avoid touching the printed surface
of the paper immediately after
printing, the surface may not be
completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
1.Yes 2.No
5
If all lines are clear and visible, press 1 on
the dial pad to finish the quality check.
---OR---
If you can see missing short lines, press 2
on the dial pad and go to
OK
6
The LCD asks you if the print quality is OK
for black and colour. Press 1 or 2 on the dial
pad.
Black OK?
1.Yes 2.No
After making your selection 1 (Yes) or 2 (No)
for both black and colour, the LCD shows:
Start Cleaning?
1.Yes 2.No
Press 1 (Yes), the machine will then start
cleaning the colours.
After cleaning is finished, press
Colour Start. The machine starts printing
the PRINT QUALITY CHECK SHEET again
and goes back to step
6
.
Poor
3
.
9