Brother MFC 3360C - Color Inkjet - All-in-One 빠른 설정 매뉴얼 - 페이지 11
{카테고리_이름} Brother MFC 3360C - Color Inkjet - All-in-One에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC 3360C - Color Inkjet - All-in-One 24 페이지. Windows vista
Brother MFC 3360C - Color Inkjet - All-in-One에 대해서도 마찬가지입니다: 설정 매뉴얼 (23 페이지), 빠른 설정 매뉴얼 (23 페이지)
페이지 인쇄
7
Print quality check
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
q
Press Start
2
Make sure paper is loaded in the paper tray.
Press Color Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the four color blocks on the
sheet.
(black/ yellow/ cyan/ magenta)
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
q
1.Yes 2.No
5
Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
OK
6
7
8
8
1
2
3
Poor
Setting Up the Machine
The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
q
1.Yes 2.No
Color OK?
q
1.Yes 2.No
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
Start Cleaning?
q
1.Yes 2.No
Press 1 (Yes), the machine will then start
cleaning the colors.
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
Choosing your language
(Canada only)
Press Menu, 0, 0.
Press a or b to choose your language
(English or French), and then press OK.
Language:English
Press Stop/Exit.
9