Fujitsu SPARC Enterprise M8000 기능 설명서 - 페이지 20

{카테고리_이름} Fujitsu SPARC Enterprise M8000에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SPARC Enterprise M8000 30 페이지. For xcp version 1041
Fujitsu SPARC Enterprise M8000에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (4 페이지), 보충 설명서 (36 페이지), 제품 노트 (44 페이지)

페이지 인쇄

Activating COD Resources

▼ To Purchase COD Hardware Activation Options

When you use the unused COD CPU which is mounted on the COD board you've

purchased, contact our sales representative to purchase the COD permits in

accordance with the number of CPUs which you make available.

To purchase the COD permits, following information is required:

Number of CPUs you newly make available

■

Chassis HostID of the system (when ordering server-specific COD permits)

■

You can verify the Chassis HostID by logging into XSCF console and using the

showcod command.

After you purchase the COD permit, a COD key is sent from Fujitsu.

▼ To Install a COD Key

This procedure tells you how to install the key Fujitsu sent you to activate COD

permits on your server.

If headroom is enabled, this procedure decreases headroom to compensate for the

added COD permits. This automatic reduction in headroom is designed to avoid

accidental abuse of headroom. You can increase headroom again manually after

installation. See

1. Log in to the XSCF console with platadm privileges.

2. Execute the addcodactivation command with the key provided by Fujitsu:

XSCF> addcodactivation key

For example:

XSCF> addcodactivation \

01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxx

SPARC Enterprise Mx000 Servers Capacity on Demand (COD) User's Guide • January 2012

"To Enable, Increase, or Decrease Headroom" on page

11.