Fujitsu SPARC ENTERPRISE T5220 개요 매뉴얼 - 페이지 27
{카테고리_이름} Fujitsu SPARC ENTERPRISE T5220에 대한 개요 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SPARC ENTERPRISE T5220 34 페이지. Sparc enterprise
Fujitsu SPARC ENTERPRISE T5220에 대해서도 마찬가지입니다: 사이트 계획 매뉴얼 (26 페이지), 시작하기 매뉴얼 (12 페이지), 안전 및 규정 준수 매뉴얼 (34 페이지)
페이지 인쇄
Internal hardware drive mirroring (RAID 1)
■
Error detection and correction for improved data integrity
■
Easy access for most component replacements
■
Related Information
"Hot-Pluggable and Hot-Swappable Components" on page 13
■
"Power Supply Redundancy" on page 13
■
"Environmental Monitoring" on page 14
■
"Support for RAID Storage Configurations" on page 15
■
"Error Correction and Parity Checking" on page 15
■
Hot-Pluggable and Hot-Swappable Components
SPARC Enterprise T5120 and T5220 server hardware is designed to support
hot-plugging of the chassis-mounted hard drives, and hot-swapping of fan units, and
power supplies. By using the proper software commands, you can install or remove
these components while the system is running. Hot-swap and hot-plug technology
significantly increases the system's serviceability and availability by providing the
ability to replace hard drives, fan units, and power supplies without service
disruption.
Related Information
SPARC Enterprise T5120 and T5220 Servers Product Notes
■
SPARC Enterprise T5120 and T5220 Servers Administration Guide
■
Integrated Lights Out Manager (ILOM) software documentation
■
Integrated Lights Out Manager (ILOM) 3.0 Supplement for SPARC Enterprise T5120
■
and T5220 Servers
SPARC Enterprise T5120 and T5220 Servers Service Manual
■
SPARC Enterprise T5120 and T5220 Servers Safety and Compliance Guide
■
Power Supply Redundancy
The SPARC Enterprise T5120 and T5220 servers provide two hot-swappable power
supplies, enabling the system to continue operating should one of the power supplies
fail or if a power source fails.
Understanding Server Features
13