Brother MFC-210C 빠른 설정 매뉴얼 - 페이지 30

{카테고리_이름} Brother MFC-210C에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-210C 37 페이지. Facsimile equipment
Brother MFC-210C에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (40 페이지), 빠른 설정 매뉴얼 (37 페이지), 부품 참조 목록 (30 페이지)

페이지 인쇄
Brother MFC-210C 빠른 설정 매뉴얼
Step 2
For Network Interface Cable Users (MFC-420CN, MFC-620CN only)
For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 4 - 11.
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here icon to install
the printer and scanner drivers. If the
language screen appears, select your
language.
5
Click MFL-Pro Suite to install.
28
Installing the Driver & Software
®
8.6 to 9.2
®
if you already connected an
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
7
Connect the network interface cable to the
machine, and then connect it to a free port
on your hub.
To connect the network interface cable to
the machine:
1. Open the scanner cover to its open
position.
2. Insert the network cable into the LAN
socket, marked with a
will find the LAN socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully route the network cable
through the trench and out the back of
the machine as shown below.
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
In case of using both USB and LAN cables,
route both cables through the trench.
®
.
symbol. You