Fujitsu C150-E194-01EN 운영자 매뉴얼 - 페이지 25

{카테고리_이름} Fujitsu C150-E194-01EN에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu C150-E194-01EN 40 페이지. Image scanner

5) Adjust the document guides to the document width, then straighten the documents.

If the documents are placed loosely between the left and right guides, they may be

read diagonally.

6) Switch the reading mode by pressing the Duplex button.

This switching is available from a screen of the device driver. For details, refer to

the device driver manual.

When the Function No. display is ON, the single-sided reading mode is active.

When the Function No. display blinks, the double-sided reading mode is active.

7) Press the scan button on the main unit.

u Key point

8) After finishing reading, remove the documents from the stacker.

u Note

When validating the Duplex button and Scan button on the equipment using the

TWAIN driver, you must select "Follow Instructions on the Operator Panel of the

Equipment" on the operation environment setting screen of the device driver.

3-6

Press the scan button to start the application software. The mark is displayed

until the application starts.

If the application software does not start and the Function No. display panel

displays the Function No. again, the scan processing is canceled.

Stacker

Document guide

Function No. display panel

Duplex button

Scan button

fi-4110CU Image Scanner Operator's Guide