Fujitsu CG01000-464802 - Scan Partner 15c Color 15ppm-bl 30 Bit SCSI Cent50 Adf Lgl 사용자 설명서 - 페이지 13

{카테고리_이름} Fujitsu CG01000-464802 - Scan Partner 15c Color 15ppm-bl 30 Bit SCSI Cent50 Adf Lgl에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu CG01000-464802 - Scan Partner 15c Color 15ppm-bl 30 Bit SCSI Cent50 Adf Lgl 23 페이지. Image scanner

페이지 인쇄

2.7 Connecting the Cable

i). Turning the Power Off
Depress the side marked "O" to turn the power off.
Connect the power cable and SCSI signal cable as shown in Figure 2-8.
ii). Turning the Power On
Depress the side marked "I" to turn the power on. The POWER LED will light. If
not, please check the power source.
iii). SCSI Termination
The Fujitsu Scanpartner 15C comes complete with a built in SCSI terminator. If
the Scanner is the last device in a SCSI chain the terminator should be switched
on. If the Scanner is not the last device the terminator should be off. The
terminator on/off switch is located on the back of the Scanner, to the left of the
SCSI cable connectors.
Host PC
Term.
Host PC
Term.
Scanner
(Terminator Off)
Scanner
(Terminator On)
2-9
SCSI Device
Term.