Fujitsu fi 5750C - Document Scanner 시작하기 - 페이지 24

{카테고리_이름} Fujitsu fi 5750C - Document Scanner에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi 5750C - Document Scanner 40 페이지. Image scanner
Fujitsu fi 5750C - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 (2 페이지), 시작하기 매뉴얼 (42 페이지), 브로셔 및 사양 (2 페이지), 사용 설명서 (11 페이지), 소모품 교체 및 청소 지침 (19 페이지), 청소 지침 (2 페이지), 청소 및 유지 관리 (39 페이지), 청소 지침 (2 페이지)

페이지 인쇄
Fujitsu fi 5750C - Document Scanner 시작하기
6.
Set the scanning resolution, document
size etc. on the [TWAIN driver] window
(for setting details of the scanning) and
click the [Scan] button.
For details about [TWAIN driver],
refer to the "FUJITSU TWAIN32
HINT
Scanner Driver User Guide" provided
on the Setup CD-ROM
7.
The document is scanned and it's image
will be displayed on the ScandAll 21
screen.
If the scanning is performed successfully,
the installation has been finished.
For details about various types of scanning,
refer to the "fi-5750C Operator's Guide", pro-
vided on the User Manual CD-ROM.
2.3.2 For Fujitsu ISIS Scanner
Driver
Preparation
Please confirm the following items before
installing the ISIS driver:
2-8
Setup CD-ROM
•
Confirm if the scanner is connected correctly to your
•
PC.
About connecting your scanner to the PC,
please refer to "2.1 Installing the
HINT
scanner" on page 2" of this manual.
Installing FUJITSU ISIS
scanner driver
1.
Turn on the scanner.
2.
Turn your PC on an log on to
Windows.
When using Windows NT 4.0, Windows
2000 and/or Windows XP, please login as
ATTENTION
a user with "Administrator" privileges
(privileges of the administrator of your
PC).
In this manual, Windows XP screens are
used. The screens and operations might
HINT
differ slightly depending on your OS.
The scanner is automatically detected
and "A detection wizard of the new
hardware " or "An addition wizard of new
hardware" may be displayed. Please
click the [cancel] button and close the
wizard screen. (* The screen might differ
slightly depending on your OS)
3.
Insert the Setup CD-ROM into the CD
Drive.
The <SETUP DISK STARTUP SCREEN>
will be displayed.