Fujitsu FI 6140 - Document Scanner 시작하기 매뉴얼 - 페이지 15
{카테고리_이름} Fujitsu FI 6140 - Document Scanner에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI 6140 - Document Scanner 20 페이지. Image scanner
Fujitsu FI 6140 - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (6 페이지), 사양 (2 페이지), 사용 설명서 (10 페이지), 시작하기 (23 페이지), 청소 지침 (2 페이지)
페이지 인쇄
7.
Select a scanner in the displayed dialog box.
To use FUJITSU TWAIN 32:
Select [FUJITSU fi-6140dj] or [FUJITSU fi-6240dj],
and then click the [Select] button.
To use FUJITSU ISIS:
Select [Fujitsu fi-6140] or [Fujitsu fi-6240dj] and then
click the [Select] button.
8.
Select [Scan] on the menu, and then select [Scan
Settings].
9.
In the [Scan Settings] dialog box, clear the [Save to
file] checkbox.
HINT
You only check the operation now, so you do not have to
save to file.
10. Click [Scanner Settings].
⇒
A setup dialog box appears for you to configure
scanner driver settings.
11. Configure scanner settings such as the resolution
12. Click the [Scan] button.
When you are using FUJITSU TWAIN 32, you may see the
TWAIN Driver setup dialog box again. If so, click the [Scan]
button on the dialog box.
fi-6140/fi-6240 Image Scanner Getting Started
and paper size.
To use FUJITSU TWAIN 32:
On the dialog box below, configure scan settings, and
then click the [OK] button.
To use FUJITSU ISIS:
On the dialog box below, configure scanning settings,
and then click the [OK] button.
⇒
You are returned to the [Scan Settings] dialog box.
HINT
⇒
The document is scanned and the scanned image is
displayed in the [ScandAll PRO] window.
10