Fujitsu fi-4110CU Series 소모품 교체 및 청소 지침 - 페이지 5

{카테고리_이름} Fujitsu fi-4110CU Series에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-4110CU Series 13 페이지.

EPLACING THE

SSEMBLY

A defective or improperly installed Pad Assembly can cause misspicks,

skew, or double fed documents. To replace the Pad Assembly perform

the following steps.

•

Remove all documents

from the ADF Paper

Chute. Open the ADF

by pulling the ADF

button up.

•

Remove the Pad

Assembly by pressing

Down on the pick arm

then pull out the pad

assembly to remove it.

•

Attach the new Pad

Assembly while

pressing down on the

pick arm so it is out of

the way. Be sure to

seat the pad

completely to avoid

jamming of paper

being fed.

Note:

After replacement of any consumable reset the counter for that

consumable by following the "Consumables Page Count" Section at

the front of these instructions to reset paper counts.

fi-4110CU/M3091/M3092 S

Open ADF

to Front

Pad Assy.

ERIES

ONSUMABLE

EPLACEMENT AND

ADF button

Push down on

pick arm to

remove pad.

LEANING

NSTRUCTIONS