2N EasyRoute 방법 - 페이지 5

{카테고리_이름} 2N EasyRoute에 대한 방법을 온라인으로 검색하거나 PDF를 다운로드하세요. 2N EasyRoute 6 페이지. Umts data and voice gateway
2N EasyRoute에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (3 페이지)

페이지 인쇄

APN (Access Point Name) identifies the provider's Internet access code. Enter

the required service access code into the Dial parameter. This telephone number

is determined by the provider. '*99#' is used typically.

Fill in the User and Password items do define the user name and password for

connection to the provider: 'internet' in most cases. Having finished, click on

Apply to proceed to the next page.

Wireless

Use this window to configure Wi-Fi transmission easily. If you do not intend to

enable the wireless network, set nothing and push Apply. If you want to enable

the wireless network, set only the basic parameters here. The other parameters

will be set to default values. Use the SETUP menu to change the default values.

Select/unselect Enable to activate/deactivate the Wi-Fi transmitter. SSID

(Service Set Identifier) is the Wi-Fi identifier that is sent to users. It is a unique

network identifier in the given space.

Encryption provides security to the 2N® EasyRoute Wi-Fi interface. The

available security levels include WEP, WPA, WPA2 and WPA+WPA2. The Wi-Fi

security Key format options are ASCII or HEX, i.e. ASCII characters or digits

respectively.

The Wi-Fi security Key consists of a sequence of alphanumeric characters, or

hexadecimal symbols as defined in the Key format.

Having set the values, click on Apply.

Now your 2N® EasyRoute gateway is ready for basic operation. Refer to

the User Manual sections devoted to configuration or the other HOW TO

manuals for details on all programmable parameters.

Průvodce