Brother MFC-5840CN 사용자 설명서 - 페이지 7
{카테고리_이름} Brother MFC-5840CN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-5840CN 44 페이지. Brother internet fax user's guide
Brother MFC-5840CN에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (37 페이지), 빠른 설정 매뉴얼 (39 페이지), 서비스 매뉴얼 (8 페이지)
페이지 인쇄
IP Address
This field displays the current IP address of the machine. If you have
selected a BOOT Method of Static, enter the IP address that you
wish to assign to the machine (check with your network manager for
the IP address to use). If you have selected a method other than
Static, the machine will attempt to determine its IP address using the
DHCP or BOOTP protocols. The default IP address of your machine
will probably be incompatible with the IP address numbering scheme
of your network. We recommend that you contact your network
manager for an IP address for the network the unit will be connected
on.
1
Menu/Set
Press
1
2 for
,
FAX-1940CN/MFC-5440CN)
Select 1.Change and enter the IP address.
2
3
Menu/Set
Press
4
Stop/Exit
Press
When the Boot Method is set to "Auto", the machine cannot
receive IP address from a BOOTP server in Windows
So please ensure that you use DHCP for Windows
server.
Subnet Mask
This field displays the current subnet mask used by the machine. If
you are not using DHCP or BOOTP to obtain the subnet mask, enter
the desired subnet mask. Check with your network manager for the
subnet mask to use.
1
Menu/Set
Press
1
3 for
,
FAX-1940CN/MFC-5440CN)
Select 1.Change and enter the Subnet Mask address.
2
3
Menu/Set
Press
4
Stop/Exit
Press
1 - 5 CONTROL PANEL SETUP
5
1
2
,
,
,
for MFC-3340CN/MFC-5840CN. (
.
.
5
1
3
,
,
,
for MFC-3340CN/MFC-5840CN. (
.
.
4
,
®
2000.
®
2000
4
,