Brother MFC-5840CN 빠른 설정 매뉴얼 - 페이지 12

{카테고리_이름} Brother MFC-5840CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-5840CN 39 페이지. Brother internet fax user's guide
Brother MFC-5840CN에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (37 페이지), 사용자 설명서 (44 페이지), 서비스 매뉴얼 (8 페이지)

페이지 인쇄

Step 1

Print Quality Check

After the cleaning cycle is finished, the LCD

shows:

Set Paper and

Press Start

Make sure the paper is loaded in the paper

tray.

Press Color Start.

The machine starts printing the PRINT

QUALITY CHECK SHEET (only during

initial ink cartridge installation).

Check the quality of the four color blocks

formed by the short lines printed on the

sheet.

(BLACK/ CYAN/ YELLOW/ MAGENTA)

1. Check the quality of the four-color blocks formed by the short lines.

2. If all the short lines are clear and visible, the quality is acceptable. the quality is acceptable.

Select (Yes). If you can see missing short lines, select (No) to begin the color cleaning process

and follow the prompts on the LCD.

Avoid touching the printed surface

of the paper immediately after

printing, the surface may not be

completely dry and may stain your

fingers.

The LCD shows:

Is Quality OK?

1.Yes 2.No

Setting Up the Machine

Print Quality Check

If all lines are clear and visible, press 1 on

the dial pad to finish the quality check.

---OR---

If you can see missing short lines, press 2

on the dial pad and go to

The LCD asks you if the print quality is OK

for black and color. Press 1 or 2 on the dial

pad.

Black OK?

1.Yes 2.No

After making your selection 1 (Yes) or 2 (No)

for both black and color, the LCD shows:

Start Cleaning?

1.Yes 2.No

Press 1 (Yes), the machine will then start

cleaning the colors.

After cleaning is finished, press Color Start.

The machine starts printing the PRINT

QUALITY CHECK SHEET again and goes

back to step

Poor