Brother MFC-5860CN 설정 매뉴얼 - 페이지 10
{카테고리_이름} Brother MFC-5860CN에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-5860CN 23 페이지. Mfc-5460cn; mfc-5860cn
Brother MFC-5860CN에 대해서도 마찬가지입니다: 빠른 설정 매뉴얼 (34 페이지), 빠른 설정 매뉴얼 (34 페이지), 서비스 매뉴얼 (9 페이지)
페이지 인쇄
STEP 2
Installing the Driver & Software
4
Click Finish to restart your computer. After
restarting the computer, you must be logged on
with Administrator rights.
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQs in
Start/All Programs/Brother/XXX-XXXX (where
xxx-xxxx is your model name).
The MFL-Pro Suite has been installed
completely.
8
For MFC-3360C users
1
Insert the USB cable to the USB port marked
with a
symbol. You will find the USB port
next to the handset cord socket as shown
below.
2
Connect the USB cable to your computer.
Improper Setup
• DO NOT connect the machine to a USB port on
a keyboard or a non-powered USB hub.
Brother recommends that you connect the
machine directly to your computer.
• Make sure that the cable does not restrict the
cover from closing, or an error may occur.
• Make sure you use a USB 2.0 cable that is no
longer than 6 feet long (2 meters).
3
Turn on the machine by connecting the power
cord.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
®
Windows