Fujitsu fi-4530C 시작하기 - 페이지 10

{카테고리_이름} Fujitsu fi-4530C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-4530C 27 페이지. Image scanner
Fujitsu fi-4530C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지), 설치 절차 (3 페이지), 소모품 교체 및 청소 지침 (14 페이지), 청소 지침 매뉴얼 (13 페이지), 청소 지침 (2 페이지), 사용 설명서 (10 페이지), 설치 절차 (5 페이지)

페이지 인쇄
Fujitsu fi-4530C 시작하기
Chapter2
2.1

Installing the Scanner

1. Place the scanner at its installation site.
For details on the scanner's dimensions and
required installation space, refer to "fi-4530C
Operator's Guide" "7.2 Installation Specifica-
tions" on the Setup CD-ROM.
2. Attach the ADF paper chute.
Hold the ADF paper chute and insert its tabs into
the holes on the rear side of the scanner as shown
in the figure below so that the side guides face up.
ADF paper chute
Side guide
3. Connect the AC adapter.
Use only the AC adapter provided by
ATTENTION
the manufacturer.
1) Connect the AC cable to the AC adapter.
2) Connect the connector of AC adapter to the DC
inlet of the scanner.
INSTALLATION OF THE SCANNER
Tab
fi-4530C Image Scanner Getting Started
3) Insert the AC cable into the power outlet.
2.2
Connecting the Scanner
to Your PC
When running Windows 95 or Windows NT 4.0, con-
nect the scanner to your PC by the SCSI cable.
When running Windows 98, Windows Me, Windows
2000, or Windows XP, connect the scanner to your PC
by either the USB interface cable or the SCSI cable.
Do not connect both the USB interface
ATTENTION
cable and the SCSI cable at the same time.
It is not possible to use the USB interface
with Windows 95 and Winows NT 4.0.
■ Connecting the USB Interface
Cable
1. Connect the USB interface cable to the USB
interface connector of the scanner.
3