Brother MFC-680CN 빠른 설정 매뉴얼 - 페이지 29

{카테고리_이름} Brother MFC-680CN에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother MFC-680CN 37 페이지. Brother multifunction printer quick setup guide

Installing the Driver & Software

For Network Interface Users

(For Mac OS

Important

Make sure that you have finished the

instructions from STEP 1 Setting Up the

Machine on pages 4 through 13.

Note

• For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com)

• Make sure there are no memory cards or a USB

Flash memory drive inserted into the media drives

or USB direct interface at the front of the machine.

Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

Connect the network cable to the LAN socket

marked with a

LAN socket inside the machine on the left as

shown below.

X 10.2.4 or greater)

X, visit

symbol. You will find the

Carefully guide the network cable to the trench

as shown below, following the trench around

and toward the back of the machine. Then,

connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide

both cables through the trench with one on top of

the other.

Lift the scanner cover to release the lock

Gently push the scanner cover support

down

and close the scanner cover

Note

Make sure that the machine is turned on by

connecting the power cord.

Macintosh