Fujitsu fi-4860C 소모품 교체 및 청소 지침 - 페이지 13

{카테고리_이름} Fujitsu fi-4860C에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-4860C 30 페이지. Production color scanner
Fujitsu fi-4860C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 시트 (2 페이지)

페이지 인쇄
Fujitsu fi-4860C 소모품 교체 및 청소 지침
R
D
EPLACING THE
ISCHARGE
There are two Discharge Brushes in the ADF area of the scanner. These
brushes remove paper dust and other contaminents from the Pick Roller
Unit and the Brake Roller. Replacing these brushes and keeping them in
good condition will increase the life of both the Pick roller Unit and Brake
Roller. Each consumable kit contains one brush. Please inspect the
brushes and replace the one that is in the worst condition.
•
Lift the Lever at the right to
open the Upper Transport
Unit.
U
D
B
PPER
ISCHARGE
RUSH
•
Remove the Pick Roller Unit
from the scanner.
•
Loosen the two thumb
screws and lower the
Discharge Brush to remove.
•
Align the notches in the new
Discharge Brush with the two
thumb screws and push up
against the screws. Tighten
the thumb screws to secure
the brush.
•
Reinstall the Pick Roller Unit.
fi-4860C C
B
RUSHES
Notches
R
ONSUMABLE
EPLACEMENT AND
Lever
C
I
LEANING
NSTRUCTIONS
13