Fujitsu FI-5015C 시작하기 - 페이지 22

{카테고리_이름} Fujitsu FI-5015C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5015C 24 페이지. Image scanner
Fujitsu FI-5015C에 대해서도 마찬가지입니다: 시작하기 (26 페이지), 브로셔 및 사양 (2 페이지), 소모품 교체 및 청소 지침소모품 교체 및 청소 지침 (10 페이지)

페이지 인쇄

Appendix2

ARNI N G

When operating the scanner, the

ADF's inside glass becomes very

hot.

Before you clean inside the scan-

ner, turn off its power and unplug

the AC adapter from the outlet. Wait

for at least 15 minutes.

■ Do not use aerosol sprays near

the scanner

ARNI N G

Do not use any aerosol sprays or

alcohol based sprays to clean the

scanner.

Dust blown up by strong air from

the spray may enter the inside of

the scanner. This may cause the

scanner to fail or malfunction.

Sparks, caused by static electricity,

generated when blowing off dust

and dirt from the outside of the

scanner may cause a fire.

■ Cleaning Materials

Cleaning

Parts No.

Materials

Cleaner F1

PA03950-

0352

Cleaning Wipe

PA03950-

0419

Lint-free dry

- Commercially available one

cloth

For details about the cleaning materials, contact the

FUJITSU scanner dealer where you purchased the scan-

ner.

DAILY CARE

Remarks

1 bottle

Moisten a cloth with

this fluid and wipe the

scanner clean.

24 sheets/pack

Pre-moistened with

Cleaner F1, Cleaning

Wipes are used

instead of moistened

cloths.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

ATTENTION

■ Locations and Cycle for Cleaning

Part to clean

Pad ASSY

Pick roller unit

Pinch roller

Glass

ATTENTION

For details on the cleaning the ADF, refer to "3.2 clean-

ing the ADF" in fi-5015C Operator's Guide on the Setup

DVD-ROM".

AP-4

It may take long before the cleaner

vaporizes if a large quantity is used.

When cleaning the scanner parts,

dampen a cloth with modest quantities

of the cleaner. In addition, wipe off the

cleaner completely with a soft lint-free

cloth to leave no residue on the surface

of the cleaned parts.

Standard Cleaning Cycle

Clean these parts after every

1,000 scans.

The scanner must be cleaned more fre-

quently if you scan any of the following

type of sheets:

•

Documents of coated paper

•

Documents that are almost completely

covered with printed text or graphics

•

Chemically treated documents such

as carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Documents written by pencil

•

Documents with not enough fixed a

toner.