Fujitsu fi-5220C 시작하기 - 페이지 26

{카테고리_이름} Fujitsu fi-5220C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5220C 28 페이지. Flatbed scanner
Fujitsu fi-5220C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 (2 페이지), 시작하기 매뉴얼 (29 페이지), 사용 설명서 (13 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)

페이지 인쇄

Appendix2

ARNI N G

■ Cleaning Materials

Cleaning

Materials

Cleaner F1

CA99501-

(or isopropyl

0013

alcohol)

Lint-free dry

Commercially available one

cloth

* For details about cleaning materials, contact the

FUJITSU scanner dealer where you purchased the

scanner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

AP-4

DAILY CARE

The glass surface inside the

ADF becomes hot during the

operation.

Before you clean inside the

scanner, turn off its power and

unplug the AC adapter from the

outlet. Wait for at least

15 minutes.

Do not turn off the scanner when

you clean the Feed rollers.

Parts

Remarks

Number

1 bottle

Moisten the cloth with

this fluid and wipe the

scanner clean. (*)

■ Parts to Clean and When

Part to clean

Pad ASSY

Pick roller

Feed rollers

Plastic rollers

Glass

The scanner must be cleaned frequently

ATTENTION

if you scan any of the following type of

paper sheets:

•

Documents of coated paper

•

Documents that are almost completely

covered with printed text or graphics

•

Chemically treated documents such as

carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Handwritten documents

For details on the cleaning the ADF, refer to "3.3 Clean-

ing the ADF" in fi-5120C/fi-5220C Operator's Guide on

the Setup CD-ROM".

Standard Cleaning Cycle

Clean these parts after every

1,000 scans.