Fujitsu fi-5220C 설치 절차 매뉴얼 - 페이지 4

{카테고리_이름} Fujitsu fi-5220C에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5220C 9 페이지. Flatbed scanner
Fujitsu fi-5220C에 대해서도 마찬가지입니다: 시작하기 (28 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 (3 페이지), 사양 (2 페이지), 시작하기 매뉴얼 (29 페이지), 사용 설명서 (13 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지)

페이지 인쇄
Fujitsu fi-5220C 설치 절차 매뉴얼
Fujitsu SCSI Scanner Installation Procedures
Next go to the NT diagnostics window and check for resource conflicts. The SCSI controller
listed as "aic78xx" should not be sharing its IRQ with any other devices in the system.
Step C: Installing the drivers from the Setup CD.
To begin it is recommended that you install the drivers first before connecting the scanner.
Installing the ASPI-Twain driver.
The STI-Twain drivers are not supported by Windows NT, consequently, you must install
the ASPI-Twain driver.
1. Insert the Scanner Setup CD into your CD Rom.
2. Next please complete the pre-registration box when it appears and click the submit
button.
3. Afterwards close your browser and click the Install Products button on the Scanner
Setup Menu.
4. On the next screen click on Twain Driver and you may be presented with the option
to install the Error Recovery Guide.
5. After you have installed the Error Recovery Guide (or not) follow the prompts to
complete the twain driver installation.
6. Do not reboot at this time!
Rev051906A
Windows NT 4.0
Page 4 of 9