Fujitsu FI-5530C2 시작하기 매뉴얼 - 페이지 15

{카테고리_이름} Fujitsu FI-5530C2에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5530C2 27 페이지. Image scanner
Fujitsu FI-5530C2에 대해서도 마찬가지입니다: 시작하기 (28 페이지), 설치 절차 매뉴얼 (6 페이지), 사양 (2 페이지), 시작하기 매뉴얼 (11 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지), 시작하기 (11 페이지)

페이지 인쇄

Depending on the operating system you

ATTENTION

are using, you may need to do the follow-

ing.

Windows 2000:

If you see the [Digital Signature not

Found] dialog box, click the [Yes] button.

Windows Vista:

If you see the [Found New Hardware] dia-

log box, select [Locate and install driver

software], and then in the [User Account

Control] dialog box, click the [Continue]

button, if it is displayed.

The installation of FUJITSU TWAIN 32 is complete.

Next, install ScandAll PRO (-> page 8).

To make sure that FUJITSU TWAIN 32 is

ATTENTION

successfully installed, perform a scan with

a TWAIN-compliant application such as

ScandAll PRO. For information about how

to scan with ScandAll PRO, refer to sec-

tion 2.4 "Checking Scanner Driver Opera-

tion" on page 11.

FUJITSU ISIS Scanner Driver

FUJITSU ISIS is an ISIS-compliant scanner driver.

To use this scanner with any ISIS-compatible

application, install FUJITSU ISIS, following the proce-

dure below.

■ Preparations

Do the following before installing the driver:

• Unpack the Setup CD-ROM, but do not

insert the Setup CD-ROM into the CD driver

yet.

• Connect the scanner correctly to your per-

sonal computer.

For details on how to connect the scanner,

HINT

refer to section 2.2 "Connecting the Scan-

ner to Your Personal Computer" on page 3.

■ Installing the FUJITSU ISIS

Scanner Driver

HINT

1. Press the power button to turn on the scanner.

2. Turn on your personal computer, and then log

on to Windows..

ATTENTION

3. When the scanner is automatically detected,

[Found New Hardware Wizard] or [Add/

Remove Hardware Wizard] dialog box will

appear. Click the [Cancel] button to close the

Wizard dialog box.

4. Insert the "Setup CD-ROM" into the CD drive.

⇒

ATTENTION

fi-5530C2 Image Scanner Getting Started

Screenshots taken in Windows XP are

used as examples. The displayed windows

and operations may slightly vary depending

on the operating system you are using.

Be sure to log on as a user with "Adminis-

trator" privileges.

appears.

The [SETUP DISK START UP SCREEN]

may not appear if the "AutoPlay" setting is

set to off. In this case, find "Install.exe" in

the CD-ROM using "Explore" or "My Com-

puter" and execute it.