Fujitsu FI-5530C2 시작하기 매뉴얼 - 페이지 9

{카테고리_이름} Fujitsu FI-5530C2에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-5530C2 11 페이지. Image scanner
Fujitsu FI-5530C2에 대해서도 마찬가지입니다: 시작하기 (28 페이지), 설치 절차 매뉴얼 (6 페이지), 사양 (2 페이지), 시작하기 매뉴얼 (27 페이지), 청소 지침 (2 페이지), 청소 지침 (2 페이지), 시작하기 (11 페이지)

페이지 인쇄

9. In the [Scan Settings] dialog box, clear the

[Save to file] checkbox.

You only check the operation now, so you

HINT

do not have to save to file.

10. Click [Scanner Setting].

⇒

A setup dialog box appears for you to config-

ure scanner driver settings.

11. Configure scanner settings such as the resolu-

tion and paper size.

To use TWAIN

Configure scan settings in the setup dialog box, and

then click the [OK] button.

To use ISIS

Configure scan settings in the setup dialog box, and

then click the [OK] button.

⇒

You are returned to the [Scan Settings] dialog

box.

12. Click the [Scan] button.

When you are using TWAIN, you may see

HINT

the TWAIN Driver setup dialog box again. If

so, click the [Scan] button on the dialog

box.

⇒

The document is scanned and the scanned

image is displayed in the [ScandAll PRO]

window.

If the scanned document image is displayed in the win-

dow, it means that the scanner driver is installed prop-

erly.

For further information about how to scan documents,

refer to "fi-5530C2 Operator's Guide" contained in the

Setup DVD-ROM.