Fujitsu fi-5650C 시작하기 매뉴얼 - 페이지 25

{카테고리_이름} Fujitsu fi-5650C에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5650C 40 페이지. Image scanner
Fujitsu fi-5650C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 사용 설명서 (11 페이지), 소모품 교체 및 청소 지침 (19 페이지), 청소 지침 (2 페이지), 청소 및 유지 관리 (39 페이지)

페이지 인쇄
Fujitsu fi-5650C 시작하기 매뉴얼
2.3.2 For Fujitsu ISIS Scanner
Driver
Preparation
Please confirm the following items before
installing the ISIS driver:
Setup CD-ROM
•
Confirm if the scanner is connected correctly to your
•
PC.
About connecting your scanner to the
PC, please refer to "2.1 Installing the
HINT
scanner" on page 2" of this manual.
Installing FUJITSU ISIS
scanner driver
1.
Turn on the scanner.
2.
Turn your PC on an log on to Windows.
When using Windows NT 4.0, Windows
2000 and/or Windows XP, please login
ATTENTION
as a user with "Administrator" privileges
(privileges of the administrator of your
PC).
In this manual, Windows XP screens are
used. The screens and operations
HINT
might differ slightly depending on your
OS.
The scanner is automatically detected
and "A detection wizard of the new
hardware " or "An addition wizard of new
hardware" may be displayed. Please
click the [cancel] button and close the
wizard screen. (* The screen might dif-
fer slightly depending on your OS)
3.
Insert the Setup CD-ROM into the CD
Drive.
The <SETUP DISK STARTUP SCREEN>
will be displayed.
This screen may not be displayed when
the, "Autoplay" setting of your PC is
ATTENTION
turned off. In this case, please run
"Install.exe" on the CD-ROM directly
from explorer or "My Computer".
4.
Click [INSTALL PRODUCTS].
5.
Click [ISIS Driver].
6.
The Error Recovery Guide Installation
window appears.
Error Recovery Guide is a software
providing you with troubleshooting
information displayed on the screen when
a scanner error occurs. Not installing this
software will not have an effect on the
performance of the scanner. However it is
recommended to install this software.
2-9