Fujitsu fi-5650C 청소 및 유지 관리 - 페이지 18

{카테고리_이름} Fujitsu fi-5650C에 대한 청소 및 유지 관리을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5650C 39 페이지. Image scanner
Fujitsu fi-5650C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 시작하기 매뉴얼 (40 페이지), 사용 설명서 (11 페이지), 소모품 교체 및 청소 지침 (19 페이지), 청소 지침 (2 페이지)

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

6 TROUBLESHOOTING

6.1 Removing jammed documents

6.2 Indications of operator panel for errors

6.3 Items to check before contacting the dealer where you

bought the scanner

6.4 Checking labels on the scanner

7 ONLINE SETUP

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS

Appendix

6.1 Removing jammed documents

CAUTION

-The glass surface inside the ADF becomes hot during the operation. Be careful not to touch the glass surface inside the ADF.

-Be careful not to pinch your fingers with the ADF.

If a document jam occurred because of double-feeding, etc., follow the procedure below to remove the jammed documents.

1. Remove all documents from the ADF paper chute.

2. Open the ADF by pushing the ADF button.

3. Remove the jammed documents.

4. Push in the center of the ADF to close it until the ADF button is locked. Confirm that it is closed completely.

Make sure that the ADF is completely closed. When it is not completely closed, document jams or feeding errors may occur.

ATTENTION

If there is any metal object (paper clips, etc.) in the inside of the ADF, it causes document jams. Check the inside of the ADF and make sure

there is no metal object.

Be sure to remove metal object (paper clips, etc.) from the document before scanning.