Fujitsu fi-60F 시작하기 - 페이지 14

{카테고리_이름} Fujitsu fi-60F에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-60F 20 페이지. Image scanner
Fujitsu fi-60F에 대해서도 마찬가지입니다: 브로셔 및 사양 (2 페이지), 시작하기 (20 페이지)

페이지 인쇄

2. Unlock the Shipping lock.

The carrier unit inside the scanner is secured by

the shipping lock to prevent the scanner from

becoming damaged during transportation from the

factory.

To unlock the shipping lock and use the scanner,

slide the switch on the rear of the scanner to the

right.

(locked)

(unlocked)

3. Connect the AC adapter.

Use only the AC adapter and cable

ATTENTION

provided by the manufacturer.

1) Connect the AC cable to the AC adapter.

2) Connect the AC adapter connector to the scan-

ner's DC inlet.

3) Plug the AC cable into the outlet.

2.3 Connecting the Scanner to

Your PC

■ Connecting the USB Interface Cable

1. Connect the USB interface cable to the USB

interface connector.

2. Connect the other end of the USB interface

cable to the PC.

Your scanner will be automatically detected.

For Windows 98:

When a request for inserting the CD-ROM for

Windows 98 appears, insert it into the CD drive

and click the [OK] button.

For Windows 2000:

When [Digital Signature not Found] appears,

click [Yes].

•

Be sure to use the USB cable which

ATTENTION

comes as an accessory with this

scanner.

Correct operation with commercially

available cables is not guaranteed.

•

When connecting to an USB hub,

use the first stage USB hub that is

closest to the computer. If you use

the second or later hub stages, the

scanner may not operate correctly.

The installation of the scanner is completed.